The control box is built into ABS box. The control box is built to protection grade II standard and is double insulated. The box is CE-marked according to IEC 60335-2-86. The box is CE-marked according to IEC 60335-2-86.

The control box is built to work in conjunction with anode wand with dead man’s switch. The control box is arranged in such a way that there can be no tension on the anode unless the dead man’s switch is activated. Release of the dead man’s switch immediately disconnects the voltage to the anode and cathode. The control box contains built-in monitoring of any voltage interruption on the anode and cathode ends; if the voltage is not interrupted, it will not be possible to reconnect the voltage the next time the dead man’s switch is activated.
The control box is equipped with 2 connectors. The sockets are different, in order to avoid confusion.

The control box has built-in fuses for DC output and for control current to the dead man’s switch. The fuses are of the automatic type, and are mounted under flap lid so that they can be easily reconnected.

The control box is equipped with 2 control lamps. Green indicates that the generator is transmitting voltage and that the main switch is on. White indicates that the dead man’s switch is activated and that there is voltage on the electrodes.

The control box is built to work with a 230 volt generator plant of approximately 1.0 to 3.0 KVA. The control box transmits pure DC voltage.

Control box specifications

  • Input Voltage: 230 volts, 50 Hz

  • Max. input current: 13 amperes

  • Output voltage: 300 volts DC, riple max. 4 volts

  • Max. output current: 10 amperes DC

  • Control voltage for dead man’s switch: 24 volt AC

  • Dimensions: 400 mm x 210 mm x 310 mm (length x width x height)

  • Weight: 7.4kg

  • Density class: IP54

The anode bar is equipped with a dead man’s switch. The dead man’s switch is movable, allowing you to independently identify the best possible operational position and balance of the rod relative to water depth and height.

  • Ring diameter: 300 mm stainless steel

  • Rod: 1300 mm long 26 mm fiberglass tube

  • Cable: 52 metres

  • Cathode grate

  • 320 x 320 mm copper grate.

  • Cable 8 meters

See our homepage for electrofishing:

se-electrofishers.com